Set up the topology

The topology describes how the KNX bus is built: areas, which contain lines, which contain devices. Every device needs a line to go on, so it’s best to set up the topology before you add devices. A device’s place in the topology also gives it its physical address. In the family house, all devices sit on line 1 of area 1, so the switch actuator becomes 1.1.1, the push button 1.1.2, and the blind actuator 1.1.3.

Create areas and lines

In the sidebar, click Topology. For a new project, start with Default Topology: click Add and choose it. KNX Studio creates area 0 and area 1, each with a main line. Then select area 1, click Add, and choose New Line to add line 1.1 for your devices.

A small building like the family house needs only this one line. In larger buildings, you add more lines and areas the same way, for example one line per floor.

Now the devices have somewhere to go. Next, add the devices.