Add devices

Devices are the real KNX devices that do the work: actuators in the distribution board, push buttons on the walls, sensors in the rooms. For the family house, that’s a switch actuator for the ceiling light, a push button for the living room, and a blind actuator.

Every device is based on a product from a manufacturer. The product defines what the device can do: its parameters and its communication objects. So before you add a device, its product needs to be in your project.

Add a device

  1. In Building, select the room where the device is installed, for example the living room for the push button.
  2. Click Add, then choose New Device…. The product catalog opens.
  3. Search for the product name or the order number printed on the device or its packaging, select the product, and click Download.
  4. Click Add Device….

KNX Studio places the device in the room and on a line of the topology, and gives it the next free physical address on that line. Add the switch actuator and the blind actuator to the distribution board the same way.

If a manufacturer offers a product only as a .knxprod file, click Import in the product catalog and choose the file.

To take a device out of a room, right-click it (on iPad, touch and hold it) and choose Remove From “space”. The device stays in the project.

Edit device parameters

A device’s parameters set how it behaves, for example whether a channel of the switch actuator turns the light off again automatically after a few minutes. Select the device and click Open Parameters.

Set the parameters before you link group addresses. Parameters often decide which communication objects a device has.

Delete a product

If you added the wrong product, right-click it in the product catalog (on iPad, touch and hold it), choose Delete, and confirm.

You can’t undo deleting a product.

With the devices in place, it’s time to connect them. Link group addresses to communication objects so the push button switches the ceiling light.