Create a project

A project holds everything about one building: its rooms and functions, the devices and how they’re connected, and the group addresses that let them work together. In these articles, that building is a family house with a ground floor and a first floor.

Create an empty project

  1. On a Mac, click Create Project in the Welcome to KNX Studio window, then choose Empty Project. On iPad, tap New Project.
  2. Enter a name, such as “Family House”, and choose the type of building.
  3. Choose the group address settings described below.
  4. Click Done.

Choose the group address settings

The format decides how group addresses are numbered. Three-Level (for example 1/2/3) organizes addresses in main and middle groups, such as lighting and shading. It’s the most common choice and works well for a house like this one. Two-Level uses only main groups, and Free uses plain numbers.

Management decides who creates group addresses. With Auto, KNX Studio creates the group addresses a function needs as soon as you add it. When you add the living room’s ceiling light, for example, you get group addresses for switching it and for reporting whether it’s on. With Disabled, you create every group address yourself.

You can’t change the group address format after you create the project.

Everything else stays flexible. You can change the name, the type, and the management later in the project settings: on a Mac, choose KNX Studio > Settings… and click Project; on iPad, choose Open Settings from the More menu on the Home screen.

With the project in place, start planning by structuring the building.