Connect to the KNX bus
To program devices or see what’s happening in the building, KNX Studio needs a connection to the KNX bus. It connects through a KNXnet/IP interface, a device that links your network to the bus. In the family house, it would sit in the distribution board next to the actuators.
Choose a bus interface
Make sure your Mac or iPad is on the same network as the interface. KNX Studio then finds it on its own: click Bus Interface in the toolbar and choose it under Discovered. KNX Studio remembers the interface for this project, so you only need to do this once.
Interfaces that require secure tunnelling can’t be used yet.
Add a bus interface manually
Sometimes KNX Studio can’t find an interface on its own, for example when it’s in a different network. In that case, click Bus Interface in the toolbar, choose Edit Bus Interfaces…, and click Add Bus Interface. Enter a name, the IP address, and the port, click Test Connection to check that KNX Studio can reach it, and then click Save.
Use Live Mode
Normally, KNX Studio connects to the bus only for a moment, for example while it programs a device. Live Mode keeps the connection open, which turns KNX Studio into a live view of the building.
While Live Mode is on, functions in Building and Home show their current state. When someone presses the push button in the living room, you see the ceiling light turn on in KNX Studio. You can also control functions yourself: switch the ceiling light, move the blind, and check that each device does what you planned. It’s a quick way to test a room before you leave the building.
To turn on Live Mode, click Bus Interface in the toolbar and turn on Live Mode. It’s off each time you open KNX Studio, and you don’t need it to program devices.
Once you’re connected, you’re ready to program the devices.